Appearance
System Requirements
The Binah SDK supports a wide range of devices. The following requirements must be met in order to support the calculation of vital signs using the SDK.
React Native SDK
React Native SDK version 0.71 or higher must be installed on the build machine. The React Native SDK can be downloaded from https://reactnative.dev/docs/environment-setup.
The Binah.ai React Native SDK supports Android and iOS. Android-specific and iOS-specific system requirements can be found in the sections below.
System Requirements - Android
The following device requirements must be met in order to use the Binah Framework in your Android application:
Operating System Version
To run the Binah SDK, Android 8.1 (API 27) or a higher version is required.
Benchmark Performance Verification
Based on the Geekbench 6 single-core results from https://browser.geekbench.com/android-benchmarks, it is recommended to use a device with a benchmark score of 500 or higher. Devices with a score of 300 or higher are supported.
CPU
The device processor Application Binary Interface (ABI) must support arm64-v8a. The following code can be used to verify the processor's support for arm64-v8a:
Kotlin
if (Build.SUPPORTED_64_BIT_ABIS.isEmpty() || !Build.CPU_ABI.contains("arm")) {
// The processor is NOT supported
}
Java
if (Build.SUPPORTED_64_BIT_ABIS.length == 0 || !Build.CPU_ABI.contains("arm")) {
// The processor is NOT supported
}
Camera
FPS
The camera must support 30 FPS (frames per second) imaging. The SDK enforces this requirement by verifying that CameraCharacteristics.CONTROL_AE_AVAILABLE_TARGET_FPS_RANGES contains a range with a minimum of 30 FPS and a maximum of 30 FPS.
Image Size
The camera must allow an image output size of 640x480 pixels. The SDK enforces this requirement by verifying that CameraCharacteristics.SCALER_STREAM_CONFIGURATION_MAP contains an output size of 640px width and 480px height.
Flashlight
For accurate finger measurements, it is necessary to have a flashlight near the rear camera. Refer to Binah.ai's support center at https://www.binah.ai/contact/ for detailed best practices on using the camera and the flashlight during a measurement.
Deprecation Warning
Finger measurements are deprecated and will be removed in future versions of Binah.ai's SDK.
System Requirements - iOS
The following device requirements must be met in order to use the Binah Framework in your iOS application:
iOS Version
iOS Deployment target 14 or later
Note
The deployment target can be 11 or later, but if the device's iOS version number is lower than 14, the application must avoid calling the SDK API.
Xcode Version
Xcode 11.4 or a later version is necessary for developing applications that incorporate the Binah.ai Framework.
iOS Operating System Version
Running the Binah Framework requires iOS 14 or later. When integrating with the Binah iOS Framework, ensure that the deployment target of your application is iOS 11 or later. In such cases, it is the application's responsibility to not call the Binah.ai Framework when the runtime OS version is lower than iOS 13.
iPhone Devices
The list of iPhone devices compatible with the Binah.ai Framework includes iPhone 8 and all subsequent iPhone models.
iPad Devices
The list of iPad devices compatible with the Binah.ai Framework includes iPad (6th generation) and all subsequent models, including the iPad Mini and iPad Pro families.
Swift Version
To ensure compatibility, make sure you are using Swift 5.0 or a more recent version.
C++ Flag
The Binah iOS Framework is built with the C++17 flag [-std=c++17].
Architecture
The Binah iOS Framework is compatible with arm64 architecture, which is supported by all recent iOS devices.
Camera
The Binah Framework requires access to the device's camera in order to perform its functions.
Flashlight
For accurate finger measurements, it is necessary to have a flashlight near the rear camera. Refer to Binah.ai's support center at https://www.binah.ai/contact/ for detailed best practices on using the camera and the flashlight during a measurement.
Deprecation Warning
Finger measurements are deprecated and will be removed in future versions of Binah.ai's SDK.
PPG Devices
Polar
To create a Polar session, you need a Polar device that meets the following criteria:
- The supported Polar device is Polar Verity Sense.
- The SDK requires a minimum firmware version of 2.1.0 to be supported.
Note
See the following instructions on how to update the Polar's firmware.